Xerox 750DX 5750 Administrator Guide - Page 67
Calibration
![]() |
UPC - 042215455060
View all Xerox 750DX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
22-39 Color Setup options Calibration The Calibration menu lets you calibrate the copier from the copier glass using AutoCal™ (automatic calibration). The Calibration menu also lets you remove the current calibration. When the DocuColor is calibrated, a color correction curve is applied to every color document that is processed for printing. Calibration is based on a set of density measurements and a series of target density values for specific color patches. Calibration compensates for the difference between measured values and target values. Normally you create a calibration by specifying a standard target to use with measurements that you took or measurements that you previously stored on the DocuColor. You can also specify an alternative target to be used with the current measurements. You don't need new measurements to calibrate with an alternative target. When you choose Apply/Overwrite Calibration, the currently specified target will be used with the latest measurements on the color server. TO PREPARE FOR CALIBRATION: 1. If this is the first time you are setting up the DocuColor, complete Server Setup, Network Setup, Printer Setup, PS Setup, and Color Setup, and Save Changes before you perform a calibration. 2. When the DocuColor displays the Idle screen, press the Menu button on the Control Panel to go to the Functions menu. 3. Press the down arrow to view the second screen of the Functions menu. 4. In the second screen, press the button to choose Reboot Server. 5. At the startup message, press any button. 6. Choose Run Setup to access all Setup menus. 7. Scroll to the second screen of the main Setup menu to choose Calibration. PS Setup Color Setup Job Log Setup Calibration Setup
![](/manual_guide/products/xerox-750dp-5750-administrator-guide-82b86bd/67.png)