Xerox 750DX 5750 Administrator Guide - Page 121
IPX/SPX installations, TCP/IP installations
UPC - 042215455060
View all Xerox 750DX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
AA-3 Token Ring Network Option TO CONNECT UTP (UNSHIELDED TWISTED PAIR) CABLE TO THE DOCUCOLOR: • With the DocuColor turned off, connect RJ-45 cable from the Token Ring MAU to the RJ-45 socket on the Token Ring card. Configure the NetWare, Windows NT, or UNIX server to print to the DocuColor (see the next two sections) Then proceed to page 2-2 for DocuColor Setup. TO CONNECT STP (SHIELDED TWISTED PAIR) CABLE TO THE DOCUCOLOR: • With the DocuColor turned off, connect STP cable from the Token Ring MAU to the DB-9 STP connector on the Token Ring card. Configure the NetWare, Windows NT, or UNIX server to print to the DocuColor (see the next two sections). Then, proceed to page 2-2 for DocuColor Setup. IPX/SPX installations If your network uses IPX/SPX protocols with Token Ring, configure at least one printer, a DocuColor Print Server and a DocuColor Print Queue on the NetWare server as described in "Configuring a NetWare server for printing" on page 3-4. You can configure up to eight bindery servers and one NDS tree connection to the DocuColor. This total is the same whether the DocuColor is connected by Token Ring, by Ethernet, or by both. For more information, see "Setting up an NDS connection" on page 3-6. TCP/IP installations If your network uses TCP/IP protocols with Token Ring, configure a printer and a DocuColor queue on a Windows NT server (see "Configuring a Windows NT server to support the DocuColor" on page 3-19), or on a UNIX server (see "Setting up the DocuColor on TCP/IP networks" on page 3-31).