Xerox 750DX Fiery SI Color Server Administration Guide - Page 44
Parallel Port Setup options, Setting up the Fiery SI, Port Timeout in Seconds
UPC - 042215455060
View all Xerox 750DX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
22-20 Setting up the Fiery SI Network Setup Parallel Port Setup Parallel Port Setup options Parallel port printing is enabled in Server Setup; port setup is completed in Network Setup. You must have set the Server Setup Parallel Port option to Enabled (Input) in order to print to the parallel port and enter the Parallel Port Setup options. Enable Parallel Port No/Yes [No] Select Yes if you want to print through the parallel port. You can connect a single PC compatible to the parallel port and print directly to the Fiery SI. Port Timeout in Seconds 5-60 [5] This option appears only if Enable Parallel Port is set to Yes. Your setting determines how long the Fiery SI waits without receiving data from the parallel port before deciding that the current job is complete. Until the timeout, the Fiery SI cannot receive new jobs through the parallel port, but it can continue to receive network print jobs. Ignore EOF Character Yes/No [Yes] This option appears only if Enable Parallel Port is set to Yes. This option specifies that the Fiery SI should ignore end-of-file (EOF) messages in a file. This option must be set to Yes to print PostScript files in binary format (not ASCII); under normal circumstances, it should be set to No. When this option is set to Yes, the Fiery SI uses the parallel port timeout value to determine when the end of the file has been reached. When you have configured the parallel port options, choose another network type and protocol, or choose Exit Network Setup and proceed to Printer Setup.