Xerox 750DX Fiery SI Color Server Administration Guide - Page 54

22-30 Setting up the Fiery SI Job Log Setup Calibration Change Password Clear Server Setup Scroll the main setup menu to choose Job Log Setup. Enter the options as described below. When you have finished, save changes. Job Log Setup options Default values for the following options, where applicable, appear in square brackets. Auto Print Job Log Every 55 Jobs Yes/No [No] Use this option to specify whether you want the Fiery SI to print the job log after every 55 jobs. If accounting for each printed page is important at your site, and an administrator checks the printed output, set the Job Log for automatic printing. Auto Clear Job Log Every 55 Jobs Yes/No [No] Use this option to specify whether to clear the job log after every 55 jobs. This option is only available if you selected Yes for the option to print the job log automatically. If you do not enable this option, and do not clear the job log from the Fiery XJ, the Fiery SI saves a record of all jobs. Note that the job log (together with all queued jobs) is cleared when you choose Clear Server from the main setup menu. It is also cleared when a new version or copy of color server system software is installed on the Fiery SI. Job Log Page Size Tabloid/A3 Letter/A4 [Tabloid/A3] Select the paper size for printing the job log. Fifty-five jobs are listed on a page, regardless of page size. The paper size used depends on the Default Paper Sizes setting in the Printer Setup. If the Default Paper Sizes setting is US, the job log is printed on tabloid or letter size paper, with tabloid the default. Save Changes Yes/No [Yes] Select Yes to activate any changes made in the Job Log Setup; select No to return to the main setup menu without making any changes.