Xerox LY8 User Guide - Page 13
Open the Automatic Document Feeder ADF
View all Xerox LY8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Installation (continued) Follow the steps below to properly set up your Xerox Pro 16p. 1. Remove the bag from the Pro 16p. 2. Remove the pieces of tape and the packing material. Remove the tape and the packing material supporting the clear plastic 2-sided tray. 3. To ensure the 2-sided tray is in the correct position, gently push it in the direction shown by the arrow. 4. Open the Automatic Document Feeder (ADF) and remove the packing materials shown. 5. Unscrew and remove the shipping screw from the left side of the Pro 16p. CAUTION: The Pro 16p will malfunction if the shipping screw is not removed. 6. Lift and pull open the paper tray. Turn and remove the paper tray button. CAUTION: Paper will misfeed if the paper tray button is not removed. Note: Be sure to remove the pressure plate lock from both paper trays. 7