Xerox LY8 User Guide - Page 15

Skip to the Printer Driver Software Installation in this User Guide to set up the Pro 16p

Get Xerox LY8 - WorkCentre Pro 16P B/W Laser Printer PDF manuals and user guides View all Xerox LY8 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

Installation (continued) 14. Remove the starter toner cartridge from the silver bag. Vigorously shake the cartridge to loosen the toner. • Thoroughly shaking the cartridge will assure maximum copies per cartridge. • Xerox has included a Starter Toner Cartridge. Purchased replacement toner cartridges will yield approximately three times the number of copies. 15. Remove the toner cartridge cover. 16. Slide the toner cartridge into the Pro 16p until it locks into place. 17. Close the front cover and the side cover. Skip to the Printer Driver Software Installation section in this User Guide to set up the Pro 16p for printing. 18. Plug the power cord into the Pro 16p and then into a grounded outlet. 19. Turn on the power switch. In approximately two seconds the ready indicator will light. Copying is now possible. Note: Save the carton and packing materials. They should be used to repack the Pro 16p if it has to be shipped for servicing or moved. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
9
Installation
(continued)
14. Remove the starter toner cartridge from the silver bag.
Vigorously shake the cartridge to loosen the toner.
•
Thoroughly shaking the cartridge will assure
maximum copies per cartridge.
•
Xerox has included a Starter Toner Cartridge.
Purchased replacement toner cartridges will yield
approximately three times the number of copies.
15. Remove the toner cartridge cover.
16. Slide the toner cartridge into the Pro 16p until it locks
into place.
17. Close the front cover and the side cover.
Skip to the Printer Driver Software Installation section
in this User Guide to set up the Pro 16p for printing.
18. Plug the power cord into the Pro 16p and then into a
grounded outlet.
19. Turn on the power switch.
In approximately two
seconds the ready indicator will light.
Copying is now
possible.
Note:
Save the carton and packing materials.
They should
be used to repack the Pro 16p if it has to be shipped for
servicing or moved.