Xerox LY8 User Guide - Page 44
Printer Driver Software Installation
View all Xerox LY8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Printer Driver Software Installation The printer driver software is the program that runs the printer. It converts the data in the file you want to print into information that the printer can understand. It also controls communication between the printer and computer as the data is printed. You will need the following PC hardware and software in order to use the printer driver: Computer type Operating system CPU Connection IEEE-1284 parallel cable USB Cable* (not supplied) Ethernet Network Interface (optional) IBM PC/AT or Compatible Computer Windows 95/98, Windows NT 4.0 486DX 66 MHz or better To ensure reliability use the IEEE-1284 compliant parallel cable that is supplied with the machine. Only cables labeled "IEEE-1284" can be used with your Pro 16p. To ensure reliability use a USB compliant cable purchased from your local vendor. A Xerox Ethernet network interface may be purchased from your Xerox Authorized Dealer for connecting the Pro 16p to Ethernet supported networks. * Do not use the parallel and USB ports at the same time. The USB port is assigned the higher priority over the parallel port when more than one device is connected to the machine. When a system using USB is connected to the printer while no data is supplied to the 1284 port for more than one minute, priority will be assigned to the USB port for printer services. When the USB printing has been completed and disconnected, the 1284 port priority will resume in 60 seconds after disconnection. 38