Xerox M20I User Guide - Page 194

Troubleshooting DISPLAY MEANING SOLUTION Non-Xerox Toner Cart You have used an unauthorized toner cartridge. You must use a Xerox approved cartridge. Operation Not Assigned The machine has no job to handle. Line Busy The remote fax did not answer. Try again. Contact recipient to ensure remote machine is functioning correctly. Line Error Your machine cannot connect with the remote machine, or has lost contact because of a problem with the phone line. Try again. If the problem persists, wait an hour or so for the line to clear, then try again. Or, turn the ECM mode on. Refer to "Fax Setup Options" on page 6-19 for more information. LSU Error A problem has occurred in Try Power Off / Power On. Refer to "Powering the LSU (Laser Scanning On the Machine" starting on page 2-14. If the Unit). problem still persists, please call for service. Memory Full The memory is full Either delete unnecessary documents, retransmit after more memory becomes available, or split the transmission into more than one operation. No Answer The remote fax machine Try again. Contact recipient to ensure remote has not answered after machine is functioning correctly. several redial attempts. Poll Code Err. You have used an incorrect poll code. Polling Error The remote fax machine The remote operator should know in advance you want to poll is not that you are polling and have the fax machine ready to respond to your loaded with the original document. poll. Enter the correct poll code. Or, when setting up to poll another fax machine, you have used an incorrect poll code. No Developer Cartridge The toner cartridge is not Install the toner cartridge. Refer to "Toner installed. Cartridge" on page 10-5. Page 11-12 Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide