Xerox XD105f User Guide - Page 32

Paper Tray Bypass (XD100/102/103f/120f/125/125f only) Use the Paper Tray Bypass to copy onto paper that is different from that loaded in the paper tray and to copy onto special stock such as envelopes, labels, or transparencies. Stock is fed one sheet at a time into the Paper Tray Bypass. The minimum copy size is 3.5×5.5"/ A6. The maximum copy paper size is 8.5×14" / 216×356mm. Load special stock as follows: Predrilled paper: holes toward the rear of the copier. Letterhead paper: face down with the top toward the left. Envelopes: flap side up and toward the rear. Labels: face down. Transparencies: removable stripe face up and toward the rear. • Use labels, transparencies, and envelopes specifically designed for copiers (high temperatures). 1. Place the original face down and align it with the registration guide on the document glass and close the document cover. XD103f/120f/125f copiers only Unless the SPF auto start has been disabled, the paper tray bypass cannot be selected. 2. Adjust the bypass guide to the width of the copy paper. 3. Insert a single sheet of paper into the paper tray bypass. • The paper will feed automatically. • When copying continuously, insert the next copy paper as soon as the previous sheet has fed. 24