Xerox XD105f User Guide - Page 58

Condition, Suggested solutions, Clearing the, Paper Path, Toner, Cartridge Yield, Toner Indicator is - workcentre toner cartridge

Get Xerox XD105f - WorkCentre B/W Laser Printer PDF manuals and user guides View all Xerox XD105f manuals
Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

Condition Image rubs off the copy easily. Frequent copy paper jams. The three trouble indicators are lit in the WorkCentre diagram. Toner yield is lower than expected and the Toner Indicator is on. Fewer copies from the Toner Cartridge than expected. Suggested solutions Replace the paper in the tray with paper from a new package. In high humidity areas do not leave paper in the WorkCentre for extended periods of time. Fan the stack of paper, then turn it over in the tray. Replace paper in paper tray with a fresh supply. Check/adjust paper guides. Ensure that the paper is the proper paper weight. 20 lb / 80 gsm bond paper is recommended. Check for copy paper or pieces of copy paper remaining in the WorkCentre after a paper jam has been cleared. (Refer to Clearing the Paper Path.) The machine is in the program mode. Press the Image Quality key to exit. Toner may be lodged in the cartridge. Remove the toner cartridge. Shake the toner cartridge and tap along the top of the toner cartridge over a waste receptacle. Take care not to touch the exposed toner on the left side of the cartridge. Originals contain pictures, solids, or heavy lines. Originals are forms, newsletters, books etc. The WorkCentre is being turned on and off frequently. The document cover is being left open while copies are being made. (Refer to the Toner Cartridge Yield section.) 50

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
50
Condition
Suggested solutions
Image rubs off
the copy easily.
Replace the paper in the tray with paper from
a new package.
In high humidity areas do not leave paper in
the WorkCentre for extended periods of time.
Frequent copy
paper jams.
Fan the stack of paper, then turn it over in the
tray.
Replace paper in paper tray with a fresh
supply.
Check/adjust paper guides.
Ensure that the paper is the proper paper
weight.
20 lb / 80 gsm bond paper is
recommended.
Check for copy paper or pieces of copy paper
remaining in the WorkCentre after a paper
jam has been cleared.
(Refer to
Clearing the
Paper Path
.)
The three trouble
indicators are lit
in the
WorkCentre
diagram.
The machine is in the program mode.
Press
the Image Quality key to exit.
Toner yield is
lower than
expected and the
Toner Indicator is
on.
Toner may be lodged in the cartridge.
Remove the toner cartridge. Shake the toner
cartridge and tap along the top of the toner
cartridge over a waste receptacle.
Take care
not to touch the exposed toner on the left side
of the cartridge.
Fewer copies
from the Toner
Cartridge than
expected.
Originals contain pictures, solids, or heavy
lines.
Originals are forms, newsletters, books etc.
The WorkCentre is being turned on and off
frequently.
The document cover is being left open while
copies are being made.
(Refer to the
Toner
Cartridge Yield
section.)