Xerox XD120F User Guide - Page 15
XD130df/155df copier only, 130df, The WorkCentre will
View all Xerox XD120F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Installation (continued) Follow the steps below to properly set up your Xerox WorkCentre. A E B D C 1. Remove the bag from the WorkCentre. 2. Remove the pieces of tape A, B, C, D, and the packing material E. XD130df/155df copier only Remove the tape and the packing material supporting the clear plastic 2-sided tray. XD130df/155df copier only To ensure the 2-sided tray is in the correct position, gently push it in the direction shown by the arrow. 3. Open the document cover and remove the packing materials shown. 4. Unscrew and remove the shipping screw from the left side of the WorkCentre. CAUTION: The WorkCentre will malfunction if the shipping screw is not removed. 5. Lift and pull open the paper tray. Turn and remove the paper tray button. CAUTION: Paper will misfeed if the paper tray button is not removed. For the XD 120f/ 130df/ 155df copier only Note: Be sure to remove the pressure plate lock from both paper trays. 7