Xerox XD120F User Guide - Page 44

E2 Clearing the Paper Path, Caution, Steps 3 - 5 for XD120f/130df/155df only - toner cartridges

Get Xerox XD120F - WorkCentre B/W Laser Printer PDF manuals and user guides View all Xerox XD120F manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

- E2 Clearing the Paper Path When a paper misfeed occurs the red misfeed indicator flashes on the copier diagram, and an E2 status code will flash in the display window. Paper misfeeds may occur in the areas shown below. Follow the steps below to locate and clear the misfeed. Fuser Area Exit Area Paper Feed Area 36 Paper Feed Area Note: Ensure that the alternate paper tray is lowered (XD104/ 105f/ 130df/ 155df only). 1. Press the release lever to open the side cover. Caution: Do not touch the shiny drum cartridge surface. Scratches or smudges will result in poor copy quality. Do not remove paper through the bypass. Unfused toner may adhere in the area, resulting in smudged copies. 2. Carefully remove the misfed paper in the direction shown. Steps 3 - 5 for XD120f/130df/155df only 3. Lower the right side tray 2 access door. 4. Remove the misfed paper. 5. Close the access door. If paper cannot be removed, skip to the Fuser Area. 6. Closer the side cover.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
36
– E2 Clearing the Paper Path
When a paper misfeed occurs the red misfeed indicator flashes on the
copier diagram, and an E2 status code will flash in the display window.
Paper misfeeds may occur in the areas shown below.
Follow the steps
below to locate and clear the misfeed.
Paper Feed Area
Note:
Ensure that the alternate paper tray
is lowered (XD104/ 105f/ 130df/ 155df
only).
1.
Press the release lever to open the side
cover.
Caution:
Do not touch the shiny drum
cartridge surface.
Scratches or smudges
will result in poor copy quality.
Do not remove paper through the bypass.
Unfused toner may adhere in the area,
resulting in smudged copies.
2.
Carefully remove the misfed paper in
the direction shown.
Steps 3 – 5 for XD120f/130df/155df only
3.
Lower the right side tray 2 access door.
4.
Remove the misfed paper.
5.
Close the access door.
If paper cannot be removed, skip to the
Fuser Area.
6.
Closer the side cover.
Fuser Area
Paper Feed Area
Exit Area