Xerox XD120F User Guide - Page 42
WorkCentre Care, Cleaning the Document Glass and Cover, Cleaning the Corotron Wire
View all Xerox XD120F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
WorkCentre Care Cleaning the Document Glass and Cover Keeping the document glass clean helps ensure the best possible copies. Xerox suggests that you clean the document glass at the start of each day and during the day as needed. CAUTION: Do not pour or spray water directly onto any part of the copier. 1. Slightly dampen a soft lint-free cloth or paper towel with water. 2. Wipe the surface of the document glass until it is clean and dry. 3. Wipe the underside of the white document cover until it is clean and dry. 4. Close the document cover. Cleaning the Corotron Wire If copies start getting streaks or blotches, the corotron wire may be dirty. Note: Ensure that the alternate paper tray is lowered (XD104/ 105f/ 130df/ 155df only). 1. Press the release latch to open the side cover. 2. Remove the green corotron wire cleaner from inside the copier (near the front corner of the machine). 3. Insert the corotron cleaner into the corotron wire unit. 4. Wipe the corotron wire with the corotron cleaning tool as shown. 5. Replace the cleaner and close the side cover. 34