Xerox XD120F User Guide - Page 16

Loading Paper, CAUTION, 130df

Get Xerox XD120F - WorkCentre B/W Laser Printer PDF manuals and user guides View all Xerox XD120F manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Installation (continued) 6. Secure the paper tray button and the shipping screw in the locations shown. • Turn the paper tray button to secure its storage position. Note: Save the paper tray button and the shipping screw. They will be needed if the WorkCentre has to be moved. 7. Load paper into the tray. • Refer to the Loading Paper section for additional information. • Do not fill above the max line. 8. Push the paper tray firmly back into the WorkCentre. Note: Ensure that the alternate paper tray is lowered (XD 104/ 130df/ 155df only). 9. Press the release lever to open the side cover. 10.Remove the Caution tape from the cover. 11.Remove the two red fuser pins by pulling the string upward one at a time. • Discard the fuser pins. Note: Misfeeds will occur if the fuser pins are not removed. CAUTION: Ensure that the side cover is always open before opening the front cover. 12.Press the front cover release buttons to open the front cover. 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
8
Installation
(continued)
6. Secure the paper tray button and the
shipping screw in the locations shown.
•
Turn the paper tray button to secure
its storage position.
Note:
Save the paper tray button and the
shipping screw.
They will be needed if the
WorkCentre has to be moved.
7. Load paper into the tray.
•
Refer to the
Loading Paper
section
for additional information.
•
Do not fill above the max line.
8. Push the paper tray firmly back into the
WorkCentre.
Note:
Ensure that the alternate paper tray
is lowered (XD 104/
130df/
155df only).
9. Press the release lever to open the side
cover.
10. Remove the Caution tape from the
cover.
11. Remove the two red fuser pins by
pulling the string upward one at a time.
•
Discard the fuser pins.
Note:
Misfeeds will occur if the fuser pins
are not removed.
CAUTION:
Ensure that the side cover is
always open before opening the front
cover.
12. Press the front cover release buttons to
open the front cover.