Xerox XDM1505D-WU User Manual - Page 62
Checking the Hardware and Setting the Lamp Power Saving, Show Hardware, Properties, Lamp
View all Xerox XDM1505D-WU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Scanning Checking the Hardware and Setting the Lamp Power Saving 1. Right-click on the One Touch icon and choose Show Hardware from the pop-up menu. 2. The Hardware Properties dialog box opens and shows information about your Xerox DocuMate 150 scanner. 3. Click the Properties button. Your scanner has a built-in power saving feature that is set to power down after 15 minutes of idle time. You can change the time before the scanner powers down, from 1 minute to a maximum of 4 hours. 4. Click the arrows for the Lamp time-out setting and choose a time setting. To turn the lamp on and off manually without turning off power to the scanner, click the Lamp On or Lamp Off buttons. To return the scanner to its factory settings, click Reset Device. 5. Click OK to save the changes and close the dialog box. DocuMate 150 Scanner User's Guide 57