Yamaha CLP-511 Owner's Manual - Page 16
Reverb
View all Yamaha CLP-511 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Reverb The [REVERB] button selects a number of digital reverb effects that you can use for extra depth and expressive power. ROOM HALL 1 HALL 2 STAGE REVERB To select a reverb type press the [REVERB] button a few times until the indicator corresponding to the desired type lights (the indicators light in sequence each time the [REVERB] button is pressed). No reverb is produced when all indicators are off. OFF No reverb effect is selected when no REVERB indicator is lit. ROOM This setting add a continuous reverb effect to the sound that is similar to the type of acoustic reverberation you would hear in a medium-size room. This is the default reverb setting. HALL 1 For a "bigger" reverb sound, use the HALL 1 setting. This effect simulates the natural reverberation of a medium-size concert hall. HALL 2 For a really spacious reverb sound, use the HALL 2 setting. This effect simulates the natural reverberation of a large concert hall. STAGE A simulation of the type of reverb produced in a stage environment. ROOM HALL 1 HALL 2 STAGE REVERB TEMPO/ SONG - / NO +/ YES Adjusting Reverb Depth The depth of the selected reverb effect can be adjusted for the current voice by using the [-/NO] and [+/YES] buttons while holding the [REVERB] button. The depth range is from 0 through 20 (the current depth setting appears on the LED display while the [REVERB] button is held). A setting of "0" produces no effect, while a setting of "20" produces maximum reverb depth. Press the [-/NO] and [+/YES] buttons simultaneously while holding the [REVERB] button to recall the default setting: "10". NOTE • The reverb type and depth settings affect all voices. 12