Yamaha CLP-511 Owner's Manual - Page 33

The Function Mode F9 (CLP-511) Backup Functions After selecting "F9Y. ", press the [+/YES] button to engage the backup function sub-mode, then use the [] buttons to select the desired backup function, as listed below. NOTE • The backup settings themselves, and the contents of the recorder memory, are always backed up. Even if backup is turned on via one of the functions described below, the data will only be retained in memory for about 1 week if the power is not turned on during this time. If the backup period is exceeded, all settings will be reset to their default values. If you want to retain the backup settings for longer periods, be sure to turn the power switch on for a few minutes at least once a week. F9.1: Voice ...Turns backup of the voice functions listed below on or off. Use the [-/NO] and [+/YES] buttons to turn backup "On" or "OFF". The default backup mode is "OFF". • Voice (Keyboard, Dual, Split) • Dual (Voice, Dual Functions) • Split (Voice, Split Functions) • Reverb (Type, Depth) • Effect (ON/OFF, Depth) • Variation • Touch Sensitivity • Metronome (Beat, Volume) F9.2: MIDI ...Turns backup of the MIDI functions listed below on or off. Use the [-/NO] and [+/YES] buttons to turn backup "On" or "OFF". The default backup mode is "OFF". • Channel (Transmit, Receive) • Local ON/OFF • Program Change ON/OFF • Control Change ON/OFF • MIDI Transmit Transpose F9.3: Tuning ...Turns backup of the tuning functions listed below on or off. Use the [-/NO] and [+/YES] buttons to turn backup "On" or "OFF". The default backup mode is "OFF". • Transpose • Tuning • Scale F9.4: Pedal ...Turns backup of the left pedal function on or off. Use the [-/NO] and [+/YES] buttons to turn backup "On" or "OFF". The default backup mode is "OFF". 29