Yamaha CLP-511 Owner's Manual - Page 35

Connecting to a Personal Computer HOST SELECT PC-2 PC-1 MIDI Mac TO HOST Set to the "PC-2" position. IBM-PC/AT Series Computer Connecting to an IBM-PC/AT Series Computer Connect the TO HOST connector of the Clavinova to the RS-232C port on your IBM computer, using a standard 8-pin MINI DIN → 9-pin D-SUB cross cable. Set the HOST SELECT switch to the "PC-2" position. Refer to your software owner's manual for information on any settings you might have to make on the computer side. q "PC-2" Cable Connections MINI DIN 8-PIN 1 2 3 4 8 5 8 (CTS) 7 (RST) 2 (RxD) 5 (GND) D-SUB 9-PIN 3 (TxD) • 8-pin mini DIN → 9-pin D-SUB cable. Use a "PC-1" type cable if your computer uses a 25-pin serial port. • Data transfer rate: 38,400 bps. q "PC-1" Cable Connections MINI DIN 8-PIN 1 2 3 4 8 5 • 8-pin mini DIN → 25-pin D-SUB cable. 5 (CTS) 4 (RTS) 3 (RxD) 7 (GND) D-SUB 25-PIN 2 (TxD) q Connector Pin Numbers MINI DIN 8-PIN 6 78 34 5 12 D-SUB 25-PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 D-SUB 9-PIN 54321 9876 s Trademarks • Apple and Macintosh are trademarks of Apple Computer, Inc. • IBM-PC/AT is a trademark of International Business Machines Corporation. All other trademarks are the property of their respective holders. 31