Yamaha CLP-725 CLP-725 Owners Manual - Page 13

Using Headphones, Using the headphone hanger, Speaker On/Off setting

Page 13 highlights

Setting Up PHONES Using Headphones Since this instrument is equipped with two [PHONES] jacks, you can connect two sets of standard stereo headphones. If you are using only one set of headphones, insert a plug into either jack, which automatically shuts off the speakers according to the default setting. Bottom surface Standard stereo phone plug CAUTION Do not use headphones at a high volume for an extended period of time; doing so may cause hearing loss. Using the headphone hanger You can hang the headphones on this instrument. For instructions on installing the headphone hanger, refer to "Keyboard Stand Assembly" on page 31. NOTICE Do not hang anything other than the headphones on the hanger. Doing so may damage this instrument or the hanger. Speaker On/Off setting You can set whether the sound of this instrument is always output from its built-in speaker or not. While holding down [DEMO/SONG] and [PIANO/VOICE] simultaneously, press one of the D6 - E6 key. D#6 (On) • Off (D6): The speaker will not sound. • On (D#6): The speaker will always sound regardless of whether a set of headphones is connected or not. • Normal (E6): The speaker will sound only if headphones are not connected. (This is the default setting.) NOTE When this is set to "On," Binaural Sampling and Stereophonic Optimizer below are not effective. Reproducing the Natural Sensation of Sound Distance-Binaural Sampling and Stereophonic Optimizer This instrument features two advanced technologies that allow you to enjoy exceptionally realistic, natural sound, even when listening on headphones. Binaural Sampling ("CFX Grand" Voice only) Binaural Sampling is a method that uses two special microphones set at the ear position of a performer and records the sound from a piano as it would actually be heard. Listening to the sound with this effect through headphones gives the impression of being immersed in the sound, as if it was actually emanating from the piano. Moreover, you can enjoy the sound naturally for a long time without ear fatigue. When the default Voice "CFX Grand" (page 18) is selected, connecting the headphones automatically enables the binaural sampling sound. Stereophonic Optimizer (Piano Voices other than "CFX Grand") Stereophonic Optimizer is an effect which reproduces the natural sound distance, like with the sound of Binaural Sampling, even though you are listening to it on headphones. When a piano Voice other than "CFX Grand" is selected, connecting the headphones automatically enables the Stereophonic Optimizer. Default setting: On While holding down [PIANO/VOICE], press the F#3 key to turn the function on or the F3 key to turn the function off. F#3 (On) D6 (Off) Highest key E6 (Normal) C3 F3 (Off) 13 CLP-725 Owner's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

Setting Up
13
CLP-725 Owner’s Manual
Since this instrument is equipped with two
[PHONES] jacks, you can connect two sets of
standard stereo headphones. If you are using only
one set of headphones, insert a plug into either
jack, which automatically shuts off the speakers
according to the default setting.
CAUTION
Do not use headphones at a high volume for an extended
period of time; doing so may cause hearing loss.
Using the headphone hanger
You can hang the headphones on this instrument.
For instructions on installing the headphone
hanger, refer to “Keyboard Stand Assembly” on
page 31
.
NOTICE
Do not hang anything other than the headphones on the
hanger. Doing so may damage this instrument or the hanger.
Speaker On/Off setting
You can set whether the sound of this instrument is
always output from its built-in speaker or not.
While holding down [DEMO/SONG] and
[PIANO/VOICE] simultaneously, press one of the
D6 – E6 key.
Off (D6):
The speaker will not sound.
On (D
#
6):
The speaker will always sound regardless of
whether a set of headphones is connected or not.
Normal (E6):
The speaker will sound only if
headphones are not connected. (This is the default
setting.)
NOTE
When this is set to “On,” Binaural Sampling and Stereophonic
Optimizer below are not effective.
Reproducing the Natural Sensation of
Sound Distance—Binaural Sampling
and Stereophonic Optimizer
This instrument features two advanced
technologies that allow you to enjoy exceptionally
realistic, natural sound, even when listening on
headphones.
Binaural Sampling (“CFX Grand” Voice only)
Binaural Sampling is a method that uses two
special microphones set at the ear position of a
performer and records the sound from a piano as it
would actually be heard. Listening to the sound
with this effect through headphones gives the
impression of being immersed in the sound, as if it
was actually emanating from the piano. Moreover,
you can enjoy the sound naturally for a long time
without ear fatigue. When the default Voice “CFX
Grand” (page 18) is selected, connecting the
headphones automatically enables the binaural
sampling sound.
Stereophonic Optimizer (Piano Voices other
than “CFX Grand”)
Stereophonic Optimizer is an effect which
reproduces the natural sound distance, like with
the sound of Binaural Sampling, even though you
are listening to it on headphones. When a piano
Voice other than “CFX Grand” is selected,
connecting the headphones automatically enables
the Stereophonic Optimizer.
Default setting:
On
While holding down [PIANO/VOICE], press the
F
#
3 key to turn the function on or the F3 key to
turn the function off.
Using Headphones
PHONES
Standard stereo phone
plug
Bottom surface
D
#
6 (On)
Highest key
D6 (Off)
E6 (Normal)
F3 (Off)
C3
F
#
3 (On)