Yamaha CLP-970 Owner's Manual - Page 42
note on the keyboard.
View all Yamaha CLP-970 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Recording Your Performance 2. Select a voice. Select a voice (or voices) for recording (see page 30). Set the other parameters, such as reverb and chorus. Adjust the [MASTER VOLUME] slider to set the volume level to suit your preference. You can also use the slider to adjust the level during playback. After you set the tempo or if the record standby screen does not appear, press one of the SONG SELECT [ ] [ ] buttons once to return to the New Song screen. 3. Enter record mode and select a recording track. Press and hold down the [REC] button and press the [TRACK 1] button. The [TRACK 1] indicator flashes in red. (To cancel recording, press the [REC] or [STOP] button.) Record standby screen A B NO YES NOTE Set the tempo in Step 3. NOTE See page 49 for more information on recording in Dual/ Split mode. C D Set the tempo, if necessary. If this record standby screen does not appear, press one of the SONG SELECT [ ] [ ] buttons once. 4. Start and stop recording. Recording begins automatically as soon as you play a note on the keyboard. (Optional) Press the [START/PAUSE] button to start recording. The recording screen displays the current measure number. Record screen A B NO YES C D Measure number in recording To stop recording, press the [STOP] button. The Clavinova locates the top of the song. The [TRACK 1] indicator lights up in green. (Record mode is automatically cancelled.) TIP You can record data while using the metronome. The metronome is not recorded. TIP When you press the [START/PAUSE] button during recording, recording is paused. To resume recording, press the [START/ PAUSE] button again or play a note on the keyboard. TIP When you press the [REC] button, recording pauses. 42 CLP-970