Yamaha CLP-970 Owner's Manual - Page 61

Connections Connectors CAUTION Before connecting the Clavinova to other electronic components, turn off the power to all the components. Before turning the power on or off to all components, set all volume levels to minimum (0). Otherwise, electrical shock or damage to the components may occur. R L / L+R AUX OUT 1 R L / L+R AUX IN 2 MIDI THRU OUT IN AUX PEDAL 3 TO HOST 4 Mac MIDI PC-1 PC-2 HOST SELECT 5 6 PEDAL 7 1 AUX OUT [R], [L/L+R] jacks You can connect these jacks to a stereo system to amplify the Clavinova or to a cassette tape recorder to record your performance. Refer to the diagram below and use audio cables for connection. Adjust the volume level on the stereo system or cassette tape recorder, not using the Clavinova's [MASTER VOLUME] slider. CAUTION When the Clavinova's AUX OUT jacks are connected to an external audio system, first turn on the power to the Clavinova, then to the external audio system. Reverse this order when you turn the power off. Clavinova R L / L+R AUX OUT phone plug (standard) AUX OUT alternatively cassette tape recorder stereo system RCA phono →phone adapter plug RCA phono plug audio cable AUX IN RCA phono plug CAUTION Do not route the output from the AUX OUT jacks to the AUX IN jacks. That is, when you connect an external audio device to the AUX OUT jacks, do not connect the audio device to the Clavinova's AUX IN jacks. If you make this connection, the signal input at the AUX IN jacks is output from the AUX OUT. This creates an audio loop, causing audio oscillation and abnormal playback, leading to malfunction of both pieces of equipment. TIP Use audio cables and adapter plugs with no resistance. TIP The Clavinova's [MASTER VOLUME] slider setting does not affect the signal output from the AUX OUT jacks. CLP-970 61