Yamaha CVP-89 Owner's Manual - Page 63

Utility Functions 59 s 30: MIDI Transpose Transmit This function transposes the pitch of transmitted MIDI note data up or down in semitone intervals up to a maximum of six semitones. The pitch of notes played on the keyboard is not affected. ZSelect the MIDI Transpose Transmit Function 30 MIDI TRANSPOSE 0 Select the MIDI Transpose Transmit function as described in "Selecting & Using the Utility Functions" (page 42), or press [UPRIGHT BASS] while holding [UTILITY]. The [UPRIGHT BASS] indicator will light while the [UTILITY] button is pressed. XSet the Transpose Value As Required Display -6 -5 -4 -3 -2 -1 0 +1 +2 +3 +4 +5 +6 Transposition -6 semitones -5 semitones -4 semitones -3 semitones -2 semitones -1 semitone Normal +1 semitone +2 semitones +3 semitones +4 semitones +5 semitones +6 semitones Use the TEMPO [s] and [t] buttons to set the MIDI Transpose Transmit value as required. NOTES • Press the TEMPO [s] and [t] buttons simultaneously while holding the [UTILITY] button to restore normal transmitted pitch. • Transpose is always set to Normal when the power is turned on. s 31: GM Drum Kit The CVP-89 includes two different GM drum kits that can be selected via this function. There's also an "AUTO" setting that allows automatic GM drum kit selection. 31 GM DRUM KIT AUTO NORMAL The default Yamaha-standard GM drum kit. Can be used with most General MIDI software. TG100 This kit has the same instrument assignments as the Yamaha TG100 tone generator. When a GM drum kit is selected via the panel (129 through 136 in the GM mode), the normal drum kit name will remain on the display but the TG100 kit will be played via the keyboard. AUTO This is the default setting. The TG100 kit is automatically selected when appropriate disk is inserted. The NORMAL kit is selected at other times. When "AUTO" is selected and a GM drum kit is selected via the panel (129 through 136 in the GM mode), the normal drum kit will be played via the keyboard.