Yamaha CVP-89 Owner's Manual - Page 64
General Utilities
View all Yamaha CVP-89 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
60 Utility Functions General Utilities The functions in this group apply to a wide range of functions and features. s 32: Individual Key Tuning The Individual Key Tuning Feature makes it possible to individually tune each key on the CVP-89 keyboard in order to match different tuning standards. The pitch of each key can be raised or lowered by a maximum of 50 cents (approximately) from the standard pitch. ZSelect the Individual Key Tuning Function 32 IND. KEY TUNING NO/YES Select the Individual Key Tuning function - see "Selecting & Using the Utility Functions", page 42. "NO/YES" will flash on the display. Press the TEMPO [s] button (YES) to engage the Individual Key Tuning function, or the [t] button (NO) to cancel. Once you've pressed the TEMPO [s] button to engage the function you can release the [UTILITY] button. XSelect Up or Down Tuning ... First, use the [TAP] and [METRONOME] buttons to select either "ON (UP)" if INDIVIDUAL KEY TUNE you want to raise the pitch of a key or "ON (DOWN)" if you want to lower the pitch of ON(UP) ååå=+ 0 a key. OFF Individual key tuning OFF. ON (UP) Raise pitch. ON (DOWN) Lower pitch. CPress the Key To Be Tuned Once ... INDIVIDUAL KEY TUNE ON(UP) C 3=+ 0 Press the key to be tuned once to display the current tuning value on the display. "0" indicates normal pitch, positive values indicate that pitch has been increased by the corresponding number of steps (about 1.2 cents per step), and negative ("-") values indicate that pitch has been lowered by the corresponding number of steps. VPress the Key To Tune ...Subsequent presses on the key selected in the previous step tune the key in the specified "(UP)" or "(DOWN)" direction - one 1.2-cent step per press. The highest and lowest possible values are "+44" and "-44", respectively. The TEMPO [s] and [t] keys can also be used to tune as required: [s] to tune up and [t] to tune down. NOTES • "0" can be instantly selected by pressing the TEMPO [s] and [t] buttons simultaneously. BSelect a New Key Or Exit ... To tune a different key, repeat steps X through V, above. To exit from the Individual Key Tuning function, press the [UTILITY] button. NOTES • Individual key tuning is automatically turned OFF whenever the POWER switch is turned on. • The Individual Key Tuning data will be erased when the power is turned off, but can be saved to and loaded from disk by using the "Save Individual Key Tuning" and "Load Individual Key Tuning" functions (page 45).