Yamaha DSP-A592 Owner's Manual - Page 7

Speaker Setup, Speaker Configuration, Speakers To Be Used, Speaker Placement

Page 7 highlights

English SPEAKER SETUP SPEAKERS TO BE USED This unit is designed to provide the best sound-field quality with a 5 speaker configuration. The most effective speakers to use with this unit are main speakers, rear speakers and a center speaker. You may omit the center speaker. (Refer to the "4-Speaker Configuration" shown below.) The main speakers are used for the main source sound plus the effect sounds. They will probably be the speakers from your present stereo system. The rear speakers are used for the effect and surround sounds, and the center speaker is for the center sounds (dialog etc.) within programs encoded with Dolby Surround. The center speaker needs to be equal in power to the main speakers, although the rear speakers should not be equal. However, all the speakers should have high enough power handling to accept the maximum output of this unit. SPEAKER CONFIGURATION 5-Speaker Configuration This configuration is the most effective and recommended one. In this configuration, the center speaker is necessary as well as the rear speakers. If the program DOLBY PRO LOGIC or DOLBY PRO LOGIC ENHANCED is selected, conversations will be output from the center speaker and the ambience will be excellent. • Set the center channel mode to the "NORMAL" or "WIDE" position. (For details, refer to page 21.) 4-Speaker Configuration The center speaker is not used in this configuration. If the program DOLBY PRO LOGIC or DOLBY PRO LOGIC ENHANCED is selected, the center sound is output from the left and the right main speakers. However, the sound effect of other programs can be the same as that of the 5-speaker configuration. • Be sure to set the center channel mode to the "PHANTOM" position. (For details, refer to page 21.) FMroanint L Center MFraointRR Dialogue FMroanint L MFraointRR Dialogue Surround sound Surround sound Rear L Rear R Rear L Rear R SPEAKER PLACEMENT The recommended speaker configuration, the 5-speaker configuration, will require two speaker pairs: main speakers (your normal stereo speakers), and rear speakers, plus a center speaker. When you place these speakers, refer to the following. Front R Main R Center Front L Main L TV set Rear R Main: In normal position. (The position of your present stereo speaker system.) Rear: Behind your listening position, facing slightly inward. Nearly six feet (approx. 1.8 m) up from the floor. Center: Precisely between the main speakers. (To avoid interference with TV sets, use a magnetically shielded speaker.) Rear L 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34

SPEAKER CONFIGURATION
5-Speaker Configuration
This configuration is the most effective and recommended one.
In this configuration, the center speaker is necessary as well as
the rear speakers.
If the program
DOLBY PRO LOGIC
or
DOLBY PRO LOGIC ENHANCED
is selected, conversations
will be output from the center speaker and the ambience will be
excellent.
Set the center channel mode to the “
NORMAL
” or “
WIDE
position.
(For details, refer to page 21.)
4-Speaker Configuration
The center speaker is not used in this configuration.
If the
program
DOLBY PRO LOGIC
or
DOLBY PRO LOGIC
ENHANCED
is selected, the center sound is output from the
left and the right main speakers.
However, the sound effect of
other programs can be the same as that of the 5-speaker
configuration.
Be sure to set the center channel mode to the “
PHANTOM
position.
(For details, refer to page 21.)
7
English
SPEAKER SETUP
SPEAKERS TO BE USED
This unit is designed to provide the best sound-field quality with a 5 speaker configuration.
The most effective speakers to use with
this unit are main speakers, rear speakers and a center speaker.
You may omit the center speaker.
(Refer to the “
4-Speaker
Configuration
” shown below.)
The main speakers are used for the main source sound plus the effect sounds.
They will probably be the speakers from your
present stereo system.
The rear speakers are used for the effect and surround sounds, and the center speaker is for the center
sounds (dialog etc.) within programs encoded with Dolby Surround.
The center speaker needs to be equal in power to the main
speakers, although the rear speakers should not be equal.
However, all the speakers should have high enough power handling to
accept the maximum output of this unit.
SPEAKER PLACEMENT
The recommended speaker configuration, the 5-speaker configuration, will require two speaker pairs:
main speakers
(your normal
stereo speakers), and
rear speakers
, plus a
center speaker
.
When you place these speakers, refer to the following.
Main:
In normal position.
(The position of your present
stereo speaker system.)
Rear:
Behind your listening position, facing slightly inward.
Nearly six feet (approx. 1.8 m) up from the floor.
Center:
Precisely between the main speakers.
(To avoid
interference with TV sets, use a magnetically shielded
speaker.)
Front L
Center
Front R
Dialogue
Surround sound
Dialogue
Surround sound
Rear L
Rear R
Front L
Front R
Dialogue
Surround sound
Dialogue
Surround sound
Rear L
Rear R
Front R
Center
Front L
TV set
Rear R
Rear L
Main L
Main R
Main L
Main R
Main L
Main R