Yamaha DVD-C996GL DVD-C996GL Manual - Page 36

TROUBLESHOOTING s DVD PROBLEM POSSIBLE CAUSE WHAT TO DO Picture does not match your video monitor. Audio track and/or subtitle language is not the selected one. No subtitles. Angle cannot be changed. No sound from effect speakers (center and rear left/right) when digital signals from this unit are selected as the input source on your AV amplifier. No sound when playing a disc encoded with DTS. The password for setting parental level has been forgotten. The setting at '6 TV Aspect' on the setup menu is not correct. The disc does not contain the language you have selected. The disc does not have subtitles. Subtitle is turned off. The disc or the scene being played does not support multi-angle. The setting at '7 Digital Audio Output' on the setup menu is not correct. Digital connection is not made between this unit and your amplifier. Select the proper position. Show subtitles by pressing SUBTITLE or using on-screen menu. If your AV amplifier has built-in decoders for Dolby Digital, DTS or MPEG, Select 'Bitstream' at corresponding position. Make digital connection between this unit and your amplifier and adjust the settings at '7 Digital Audio Output' on the setup menu. Clear all settings on the setup menu. See 'Returning setup menu to the factory-setting' below this table. Refer to Page 28 - - 21, 23 - 29 9, 29 - s Returning setup menu to the factory-setting While playback is stopped, press and hold d (PAUSE), and then t and PLAYXCHANGE on the front panel until 'Initialized' appears on the video monitor. All settings on the setup menu return to the factory settings. s Video CD PROBLEM Menu does not appear. POSSIBLE CAUSE The disc does not have playback control function. WHAT TO DO Refer to Page - 32