Yamaha EPH-W22 EPH-W32/EPH-W22 Owners Manual - Page 12
Registering a, device Pairing, Establishing a, connection, Ending
View all Yamaha EPH-W22 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Registering a Bluetooth device (Pairing) "Pairing" is the process of registering a Bluetooth device with the receiver. Pairing must be performed when you use a Bluetooth connection for the first time, or if the pairing data has been deleted. 1. Turn off the power of the receiver. 2. Press and hold the power button (approximately four seconds). The indicator blinks rapidly; the receiver is waiting for pairing. 3. Perform the pairing process on your Bluetooth device (for details, refer to the owner's manual of your Bluetooth device). 1. Access the Bluetooth settings screen on your Bluetooth device. 2. If the Bluetooth setting is disabled, enable it. 3. In the list of detected devices, tap "EPH-BR01 Yamaha" to select it. Pairing is completed. • This receiver can pair with up to eight Bluetooth connections. When pairing has succeeded with the ninth device, pairing data is deleted for the device with the oldest Bluetooth connection. • If three minutes elapses before pairing is completed, the receiver stops waiting for pairing. • If you are asked to enter a pass key, enter the numerals "0000. " Establishing a Bluetooth connection Turn on the power of the receiver. A Bluetooth connection is established with the most-recently connected Bluetooth device. • If the connection does not occur automatically, briefly press the power button once more. • If you turn off the Bluetooth setting of the Bluetooth device, a Bluetooth connection is not established with that device when you turn on the power of the receiver. Ending a Bluetooth connection If a Bluetooth connection exists, you can end it in either of the following ways. xx Turn off the power of the receiver. xx End the Bluetooth connection on your Bluetooth device. 4 En