Yamaha G1D Owner's Manual - Page 13
Setup - g50
View all Yamaha G1D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Setup Once installation is complete, you're ready to connect and check out your MIDI guitar system (assuming you also have a G50 Guitar MIDI Converter and appropriate tone-generator/sound hardware). 1. Connect the direct guitar cable. Connect the 1/4" mono phone plug end of the direct guitar cable (supplied with the G1D) to the guitar's output jack, and the mono mini-plug end of the cable to the G1D direct guitar input jack. GUITAR MIX SYNTH 2. Connect the G1D to the G50. After making sure that the G50 Guitar MIDI Converter power is OFF, plug one end of the multipin cable supplied with the G50 into the G1D multi-pin connector, and the other end into the DIVIDED INPUT connector on the G50. The release button on the multi-pin plug should face outward. DIVIDED MONO SYNTH UP DOWN VOL Direct guitar cable s NOTES • Always connect the direct guitar cable, even if you don't intend to use the direct guitar sound. The direct guitar cable is essential for proper grounding, to minimize noise and prevent electric shock. Multi-pin cable s NOTES • For extra security and damage prevention it is a good idea to pass the cable between the strap and guitar body near the body strap pin. Strap GUITAR MIX SYNTH UP DOWN VOL 1 2 Setup Multi-pin cable