Yamaha HTR-3068 HTR-3068 Owners Manual - Page 12
Placing speakers
View all Yamaha HTR-3068 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
12345678 1 Placing speakers Select the speaker layout for the number of speakers that you are using and place the speakers and subwoofer in your room. This section describes the representative speaker layout examples. Caution • (U.S.A. and Canada models only) Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit's speaker impedance to "6 Ω MIN". For details, see "Setting the speaker impedance" (p.14). • (Except for U.S.A. and Canada models) Use speakers with an impedance of at least 6 Ω. • Use a subwoofer with built-in amplifier. • Be sure to connect the front left and right speakers. Speaker type Abbr. Function Front (L) Front (R) Center Surround (L) Surround (R) Subwoofer 1 Produce front right/left channel sounds (stereo sounds). 2 3 Produces center channel sounds (such as movie dialogue and vocals). 4 Produce surround right/left channel sounds. 5 9 Produces LFE (low-frequency effect) channel sounds and reinforces the bass parts of other channels. This channel is counted as "0.1". * Place the surround speakers in front and set "Virtual CINEMA FRONT" (p.48) in the "Setup" menu to "On". Speaker system (the number of channels) 5.1 5.1 (Virtual CINEMA 4.1 3.1 2.1 FRONT) ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●* ● ● ●* ● ● ● ● ● ● En 12