Yamaha HTR-3068 HTR-3068 Owners Manual - Page 14
-channel system
![]() |
View all Yamaha HTR-3068 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
12345678 2.1-channel system 1 9 2 ■ Setting the speaker impedance (U.S.A. and Canada models only) Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the speaker impedance to "6 Ω MIN". 1 Before connecting speakers, connect the power cable to an AC wall outlet. 2 While holding down STRAIGHT on the front panel, press z (power). z (power) STRAIGHT 3 Check that "SP IMP." is displayed on the front display. CHARGE OUT ECO SP ENHANCER STEREO TUNED SLEEP MUTE VOL. IMP.••8¬MIN ADAPTIVEDRC VIRTUAL 4 Press STRAIGHT to select "6 Ω MIN". 5 Press z (power) to set the unit to standby mode and remove the power cable from the AC wall outlet. You are now ready to connect the speakers. En 14
![](/manual_guide/products/yamaha-htr3068-htr3068-owners-manual-b07e2b2/14.png)
En
14
2.1-channel system
■
Setting the speaker impedance
(U.S.A. and Canada models only)
Under its default settings, the unit is configured for 8-ohm speakers. When connecting
6-ohm speakers, set the speaker impedance to “6
Ω
MIN”.
1
Before connecting speakers, connect the power cable to an AC wall
outlet.
2
While holding down STRAIGHT on the front panel, press
z
(power).
3
Check that “SP IMP.” is displayed on the front display.
4
Press STRAIGHT to select “6
Ω
MIN”.
5
Press
z
(power) to set the unit to standby mode and remove the
power cable from the AC wall outlet.
You are now ready to connect the speakers.
1
2
9
z
(power)
STRAIGHT
SP IMP.••8¬MIN
1
2
3
4
5
6
7
8