Yamaha HTR-3068 HTR-3068 Owners Manual - Page 20

12345678 ■ Changing the combination of video/audio input jacks If the combination of video/audio input jacks available on the unit does not match your video device, change its combination according to the output jacks of your device. You can connect a video device that has the following video/audio output jacks. Output jacks on video device Video Audio Digital optical HDMI Digital coaxial Composite video Analog stereo Digital optical Input jacks on the unit Video Audio HDMI 1-4 AUDIO 1 (OPTICAL) HDMI 1-4 AV 1 (COAXIAL) AUDIO 2 (COAXIAL) HDMI 1-4 AV 2-3 (AUDIO) AV 1-3 (VIDEO) AUDIO 1 (OPTICAL) ❑ Necessary setting For example, if you have connected a video device to AV 2 (VIDEO) and AUDIO 1 (OPTICAL) jack of the unit, change the combination setting as follows. The unit (rear) AV 2 (VIDEO) jack V Video output (composite video) VIDEO V 1 After connecting external devices (such as a TV and playback devices) and power cable of the unit, turn on the unit. 2 Press INPUT to select "AV 2" (video input jack to be used) as the input source. 3 Press OPTION. 4 Use the cursor keys (q/w) to select "Audio In" and press ENTER. CHARGE OUT ECO Audio ENHANCER STEREO TUNED In SLEEP MUTE VOL. ADAPTIVE DRC VIRTUAL 5 Use the cursor keys (e/r) to select "AUDIO 1" (audio input jack to be used). CHARGE ENHANCER STEREO TUNED SLEEP MUTE OUT VOL. ECO Audio••AUDIO 1 ADAPTIVEDRC VIRTUAL 6 Press OPTION. This completes the necessary settings. If you select "AV 2" as the input source by pressing INPUT, the video/audio played back on the video device will be output from the unit. O OPTICAL (TV) AUDIO 1 AUDIO 1 (OPTICAL) jack Video device OPTICAL O Audio output (digital optical) En 20