Yamaha HTR-3068 HTR-3068 Owners Manual - Page 50

Configuration

Get Yamaha HTR-3068 PDF manuals and user guides View all Yamaha HTR-3068 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

HDMI Configures the HDMI settings. • Default settings are underlined. ■ Configuration HDMI Control Enables/disables HDMI Control (p.70). Settings Off Disables HDMI Control. Enables HDMI Control. On Configure the settings in "TV Audio Input", "Standby Sync", "ARC", and "SCENE". • To use HDMI control, you need to perform the HDMI Control link setup (p.70) after connecting HDMI Control-compatible devices. Audio Output Selects a device to output audio. TV Audio Input Selects an audio input jack of the unit to be used for TV audio input when "HDMI Control" is set to "On". The unit's input source automatically switches to TV audio when the TV input is switched to its built-in tuner. Settings AV 1-3, AUDIO 1-2 Default AV 2 • When using ARC to input TV audio to the unit, you cannot use the input jacks selected here for connecting an external device because the input will be used for TV audio input. Standby Sync Select whether to use HDMI control to link the standby behavior of the TV and the unit when "HDMI Control" is set to "On". Settings Off On Auto Does not set the unit to standby mode when the TV is turned off. Sets the unit to standby mode when the TV is turned off. Sets the unit to standby mode when the TV is turned off only when the unit is receiving TV audio or HDMI signals. • This setting is available only when "HDMI Control" is set to "Off". Amp Enables/disables the audio output from the speakers connected to the unit. Settings Off Disables the audio output from the speakers. On Enables the audio output from the speakers. HDMI OUT (TV) Enables/disables the audio output from a TV connected to the HDMI OUT jack. Settings Off Disables the audio output from the TV. On Enables the audio output from the TV. ARC Enables/disables ARC (p.18) when "HDMI Control" is set to "On". Settings Off Disables ARC. On Enables ARC. • You do not need to change this setting normally. In case noises are produced from the speakers connected to the unit because TV audio signals input to the unit via ARC are not supported by the unit, set "ARC" to "Off" and use the TV's speakers. En 50

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
En
50
HDMI
Configures the HDMI settings.
•
Default settings are underlined.
■
Configuration
Enables/disables HDMI Control (p.70).
Settings
•
To use HDMI control, you need to perform the HDMI Control link setup (p.70) after connecting HDMI
Control-compatible devices.
Selects a device to output audio.
•
This setting is available only when “HDMI Control” is set to “Off”.
Amp
Enables/disables the audio output from the speakers connected to the unit.
Settings
HDMI OUT (TV)
Enables/disables the audio output from a TV connected to the HDMI OUT jack.
Settings
Selects an audio input jack of the unit to be used for TV audio input when “HDMI
Control” is set to “On”. The unit’s input source automatically switches to TV audio
when the TV input is switched to its built-in tuner.
Settings
AV 1–3, AUDIO 1–2
Default
AV 2
•
When using ARC to input TV audio to the unit, you cannot use the input jacks selected here for
connecting an external device because the input will be used for TV audio input.
Select whether to use HDMI control to link the standby behavior of the TV and the
unit when “HDMI Control” is set to “On”.
Settings
Enables/disables ARC (p.18) when “HDMI Control” is set to “On”.
Settings
•
You do not need to change this setting normally. In case noises are produced from the speakers
connected to the unit because TV audio signals input to the unit via ARC are not supported by the
unit, set “ARC” to “Off” and use the TV’s speakers.
HDMI Control
Off
Disables HDMI Control.
On
Enables HDMI Control.
Configure the settings in “TV Audio Input”, “Standby Sync”, “ARC”,
and “SCENE”.
Audio Output
Off
Disables the audio output from the speakers.
On
Enables the audio output from the speakers.
Off
Disables the audio output from the TV.
On
Enables the audio output from the TV.
TV Audio Input
Standby Sync
Off
Does not set the unit to standby mode when the TV is turned off.
On
Sets the unit to standby mode when the TV is turned off.
Auto
Sets the unit to standby mode when the TV is turned off only when the
unit is receiving TV audio or HDMI signals.
ARC
Off
Disables ARC.
On
Enables ARC.