Yamaha HTR-3068 HTR-3068 Owners Manual - Page 64

FM/AM radio

Page 64 highlights

FM/AM radio Problem FM radio reception is weak or noisy. AM radio reception is weak or noisy. Cause There is multi-path interference. Your area is too far from the FM station transmitter. The noises may be caused by fluorescent lamps, motors, thermostats, or other electrical equipment. Your area is too far from the FM station transmitter. Radio stations cannot be selected automatically. The AM radio signal is weak. AM radio stations cannot be registered as presets. Auto Preset has been used. Remedy Adjust the FM antenna height or orientation, or place it in a different location. Press MODE to select monaural FM radio reception (p.35). Use an outdoor FM antenna. It is difficult to completely eliminate noise. It may be reduced by using an outdoor AM antenna. Select the station manually (p.35). Use an outdoor antenna. Adjust the AM antenna orientation. Select the station manually (p.35). Use an outdoor AM antenna. Connect it to the ANTENNA (AM) jack together with the supplied AM antenna. Auto Preset is for registering FM radio stations only. Register AM radio stations manually (p.36). En 64

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78

En
64
FM/AM radio
Problem
Cause
Remedy
FM radio reception is weak or noisy.
There is multi-path interference.
Adjust the FM antenna height or orientation, or place it in a different location.
Your area is too far from the FM station transmitter.
Press MODE to select monaural FM radio reception (p.35).
Use an outdoor FM antenna.
AM radio reception is weak or noisy.
The noises may be caused by fluorescent lamps, motors,
thermostats, or other electrical equipment.
It is difficult to completely eliminate noise. It may be reduced by using an outdoor
AM antenna.
Radio stations cannot be selected automatically.
Your area is too far from the FM station transmitter.
Select the station manually (p.35).
Use an outdoor antenna.
The AM radio signal is weak.
Adjust the AM antenna orientation.
Select the station manually (p.35).
Use an outdoor AM antenna. Connect it to the ANTENNA (AM) jack together with
the supplied AM antenna.
AM radio stations cannot be registered as
presets.
Auto Preset has been used.
Auto Preset is for registering FM radio stations only. Register AM radio stations
manually (p.36).