Yamaha HTR-4063 Owners Manual - Page 60
CINEMA DSP parameters, Parameters usable in certain sound field programs, 2ch Stereo only
![]() |
UPC - 027108935942
View all Yamaha HTR-4063 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
CINEMA DSP parameters Selects a surround decoder to be used with a sound field program in the MOVIE category. J1 Dolby PLIIx Movie (Dolby PLII Movie) Neo:6 Cinema Selects the Dolby Pro Logic IIx Movie (or Dolby Pro Logic II Movie) decoder. Selects the Neo:6 (Cinema) decoder. DSP Level Change the effect level (level of the sound field effect to be added). You can adjust the level of the sound field effect while checking the sound effect. Adjustable range -6 dB to 0 dB to +3 dB Default setting 0 dB Adjust "DSP Level" as follows: • The effect sound is too soft. • There are no differences between effects of the sound field programs. → Increase the effect level. • The sound is dull. • The sound field effect is added too much. → Reduce the effect level. Parameters usable in certain sound field programs 2ch Stereo only Direct Automatically bypasses the DSP circuit and tone control circuit depending on the condition of tone control etc., when an analog sound source is played back. You can enjoy a higher quality sound. Auto (Default) Off Outputs sound by bypassing the DSP circuit and tone control circuit when both tone controls of "Bass" and "Treble" are set to 0dB. Does not bypass the DSP circuit and tone control circuit. 7ch Stereo only CT Level Adjusts the center channel volume. J2 Adjustable range 0 to 100% Default setting 100% SETUP Setting sound field program parameters SR Level Adjusts the volume of the surround R channel. J2 Adjustable range 0 to 100% Default setting 100% SB Level Adjusts the volume of the surround back channel. J2 Adjustable range 0 to 100% Default setting 35% (7.1-channel configuration) 50% (6.1-channel configuration) Straight Enhancer/7ch Enhancer only EFCT LVL Adjusts the effect level of the compressed music enhancer mode. High (Default) Low Standard effect. Sets when the high-frequency signals of the source are emphasized excessively. SL Level Adjusts the volume of the surround L channel. J2 Adjustable range 0 to 100% Default setting 100% J 1 : Surround decoders cannot be changed when used with the following MOVIE sound field programs. • Mono Movie • Sports • Action Game • Roleplaying Game J 2 : Not displayed when speakers are set to be inactive. En 60
![](/manual_guide/products/yamaha-htr4063-owners-manual-e0e517c/60.png)