Yamaha HTR-5490 Owner's Manual - Page 38

CINEMA-DSP CINEMA-DSP Programs I For moive programs: No. 8 to 10 According to the input signal format, this unit automatically chooses the appropriate decoder and DSP sound field pattern. Table of Program Names for Each Input Format Input 2 channel 5.1 channel 6.1 channel *1 No. Program Stereo DOLBY DIGITAL DTS DOLBY DIGITAL DTS ES 8 MOVIE THEATER 1 70 mm Spectacle 70 mm Sci-Fi DGTL Spectacle DGTL Sci-Fi DTS Spectacle DTS Sci-Fi Spectacle 6.1 Sci-Fi 6.1 Spectacle ES Sci-Fi ES 9 MOVIE THEATER 2 70 mm Adventure DGTL Adventure DTS Adventure 70 mm General DGTL General DTS General Adventure 6.1 General 6.1 Adventure ES General ES 10 DOLBY DIGITAL - Normal - Matrix 6.1 - - Enhanced - Enhanced 6.1 - DTS DIGITAL - SUR - Normal - ES Matrix 6.1 ES Discrete 6.1 *2 - - Enhanced - Enhanced ES PRO LOGIC Normal - - - - Enhanced - - - - PRO LOGIC Movie - - - - Music - - - - DTS Neo: 6 Cinema - - - - Music - - - - *1 means the 6.1 /ES Matrix decoder is ON. *2 means the DTS ES software encoded with Discrete 6.1 is input. y • If a Dolby Digital signal or DTS signal is input when the input mode is set to AUTO, the DSP program will be automatically switched to the Dolby Digital playback sound field or DTS playback sound field. • If Dolby Digital Surround EX software or DTS ES software is played when AUTO is selected by pressing the 6.1/ES button on the remote control, the Dolby Digital Matrix 6.1 or DTS ES decoder will automatically turn on and the corresponding DSP program will be selected. • 6.1/ES on the remote control can be used to play Dolby Digital or DTS 5.1 channel sources with rear center speaker. In this case the program name changes to the corresponding name for 6.1 channel. • When playing 6.1 channel source with 6.1/ES on the remote control off, the program name changes to the corresponding name for 5.1 channel. Note • The " " indicator does not light up when selecting the program No. 10 except for the Enhanced mode. 34