Yamaha HTR-5490 Owner's Manual - Page 57

INTRODUCTION PREPARATION BASIC OPERATION Depending on the item, press u/d to select a sub item. + TV VOL CH - PRESET TV MUTE SELECT TV VOL - CH + PRESET 2 LOW FRQ TEST TEST TONE.........OFF ≥ OUTPUT...MAIN L/R FRQ 88Hz 5 Press j / i repeatedly to change the setting of the item. + TV VOL CH - PRESET TV MUTE SELECT TV VOL - CH + PRESET 2 LOW FRQ TEST ≥ TEST TONE............ON OUTPUT...MAIN L/R FRQ 88Hz 6 Press u/d repeatedly until the menu disappears or simply press one of the DSP program group button to exit from the SET MENU. + TV VOL CH - PRESET TV MUTE SELECT TV VOL - CH + PRESET or HALL 1 CHURCH 2 JAZZ CLUB 3 ROCK CONCERT 4 ENTERTAINMENT 5 TV SPORTS 6 MONO MOVIE 7 MOVIE THEATER 1 8 MOVIE THEATER 2 9 /DTS SUR. 10 0 SELECT 11 +10 6.1/ES 12 CHP/INDEX SET MENU 1 SPEAKER SET (speaker mode settings) Use this feature to select suitable output modes for your speaker configuration. Notes • When 96-kHz sampling digital signals are input to this unit, level adjustments in items 1B,1E and 1F are possible, but those in items 1A,1C and 1D are not affected. • When 6CH INPUT is selected as the input source, level adjustments in items 1A through 1E are not affected. I 1A CENTER SP (center speaker mode) By adding a center speaker to your speaker configuration, this unit can provide good dialog localization for many listeners and superior synchronization of sound and images. The OSD shows a large, small or no center speaker depending on how you set this item. Choices: LRG (large), SML (small), NONE Initial setting: LRG LRG Select this if you have a large center speaker. The entire range of the center channel signal is directed to the center speaker. 1A CENTER SP Memory back-up The memory back-up circuit prevents the stored data from being lost even if this unit is in the standby mode. However if the power cord is disconnected from the AC outlet, or the power supply is cut for more than one week, the stored data will be lost. If so, adjust the items again. LRG SML NONE SML Select this if you have a small center speaker. The lowfrequency signals (90 Hz and below) of the center channel are directed to the speakers selected with "1E LFE/BASS OUT". 1A CENTER SP LRG SML NONE ADVANCED OPERATION ADDITIONAL INFORMATION APPENDIX English 53