Yamaha HTR-5490 Owner's Manual - Page 76
Problem, Cause, Remedy, Refer, to Dolby Surround, Dolby Digital or DTS. - troubleshooting
View all Yamaha HTR-5490 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
TROUBLESHOOTING Problem Only the speaker on one side can be heard. No sound from the effect speakers. No sound from the center speaker. No sound from the rear speakers. No sound from the subwoofer. Poor bass reproduction. No sound from the rear center speaker. A "humming" sound can be heard. Cause Remedy Refer to page Incorrect cable connections. Connect the cables properly. If the problem persists, the cables may be defective. 12, 13 Incorrect setting of "3 L/R BALANCE" Adjust it to the appropriate position. 57 on the SET MENU. The sound effect is off. Press STEREO to turn it on. 30 A Dolby Surround, Dolby Digital or DTS decoding DSP program is being used with material not encoded with Dolby Surround, Dolby Digital or DTS. Select another DSP program. 28 - 35 A 96-kHz sampling digital signal is 27 being input to this unit. The output level of the center speaker is Raise the level of the center speaker. 63 set to minimum. "1A CENTER SP" on the SET MENU is Select the appropriate mode for your center speaker. 53 set to NONE. One of the Hi-Fi DSP programs (1 to 7) has been selected. Select another DSP program. 31 - 35 The source encoded with a Dolby Digital - or DTS signal does not have a center channel signal. The output level of the rear speakers is Raise the output level of the rear speakers. 63 set to minimum. A monaural source is being played with the program 10. Select another DSP program. 31 - 35 "1E LFE/BASS OUT" on the SET Select SWFR or BOTH. 55 MENU is set to MAIN when a Dolby Digital or DTS signal is being played. "1E LFE/BASS OUT" on the SET Select BOTH. 55 MENU is set to SWFR or MAIN when a 2-channel source is being played. The source does not contain low bass - signals (90 Hz and below). "1E LFE/BASS OUT" on the SET Select MAIN. 55 MENU is set to SWFR or BOTH and your system does not include a subwoofer. The output mode for each speaker (main, center, rear, or rear center) on the SET MENU does not match your speaker configuration. Select the appropriate output mode for each speaker based on the size of the speakers in your configuration. 53 - 56 "1D REAR CT SP" on the SET MENU Select LRG or SML. 55 is set to NONE. 6.1/ES is not on. Press the 6.1/ES button on the remote control to turn 30 it on. Incorrect cable connections. Firmly connect the audio plugs. If the problem persists, the cables may be defective. 11 - 17 No connection from the turntable to the GND terminal. Connect the grounding cord of your turntable to the GND terminal of this unit. 16, 17 72