Yamaha HTR-5840 Owners Manual - Page 36
Selecting input modes
View all Yamaha HTR-5840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
PLAYBACK ■ Downmixing to 2 channels You can enjoy 2-channel stereo playback even from multichannel sources. Press PROGRAM l / h repeatedly (or press AMP to select the AMP mode, then press STEREO on the remote control) to select 2ch Stereo. l PROGRAM h AMP or STEREO 1 Selecting input modes This unit comes with a variety of input jacks. Do the following to select the type of input signals you want to use. 1 Rotate INPUT to select the input source. INPUT Front panel Remote control 2ch Stereo y You can use a subwoofer with this program when SWFR or BOTH is selected in "BASS OUT". ■ Listening to unprocessed input signals In STRAIGHT mode, two channel stereo sources are output from only the front left and right speakers. Multichannel sources are decoded straight into the appropriate channels without any additional effect processing. Press STRAIGHT (or press AMP to select the AMP mode, then press STRAIGHT on the remote control) to select STRAIGHT. STRAIGHT EFFECT or Front panel AMP STRAIGHT ENT. EFFECT Remote control STRAIGHT Press STRAIGHT (EFFECT) again so that "STRAIGHT" disappears from the display when you want to turn the sound effect back on. ■ Virtual CINEMA DSP Virtual CINEMA DSP allows you to enjoy the CINEMA DSP programs without surround speakers. It creates virtual speakers to reproduce the natural sound field. If you set "SUR. LR" to NONE (see page 58), Virtual CINEMA DSP activates automatically whenever you select a CINEMA DSP sound field program. Note Virtual CINEMA DSP will not activate, even when "SUR. LR" is set to NONE (see page 58) in the following cases: - When MULTI CH INPUT is selected as the input source. - When headphones are connected to the PHONES jack. 2 Press INPUT MODE to select an input mode. In most cases, use AUTO. INPUT MODE VCR V-AUX DTV/CBL DVD MD/CD-R TUNER CD VOLUME SP A dB L R Input source Input mode AUTO Automatically selects input signals in the following order: 1) Digital signals* 2) Analog signals DTS Selects only digital signals encoded in DTS. If no DTS signals are input, no sound is output. ANALOG Selects only analog signals. If no analog signals are input, no sound is output. * If this unit detects a Dolby Digital or DTS signal, the decoder automatically switches to the appropriate decoder. y You can adjust the default input mode of this unit (see page 61). 32