Yamaha MCR-E600 MCR-E600 Owners manual DVD / VIDEO CD / CD PLAYER - Page 6

0102DVD-E600_en.fm Page 2 Friday, July 2, 2004 11:09 AM Introduction Thank you for purchasing this unit. This Owner's Manual explains the basic operation of this unit. The region code for this set is 2. Since it is usual for DVD movies to be 2 released at different times in different regions of the world, all players have region codes and discs can have an optional region code. This unit can play discs containing the identical region code, or mentioned as region "ALL". If you load a disc of a different region code to this unit, you will see the region code notice on the screen. The disc will not play, and should be unloaded. Environmental Information This unit consists of materials which can be recycled and reused if disassembled by a specialised company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. Supplied accessories - Remote control - Batteries (two AA size) for remote control - Audio pin cable - Video pin cable - Owner's Manual Cleaning discs ● When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the centre out. Do not wipe in a circular motion. ● Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic spray intended for analog records. Symbols Used in this Manual The below symbols appear in some headings and notes with the following meanings: DVD VCD - Description refers to playback of DVD-video discs - Description refers to playback of Video CDs CD - Description refers to playback of Audio CDs SVCD - Description refers to playback of Super VCDs ● Some DVD video discs require specific functions or allow only limited functions during playback may appears on the TV screen which means that the function is not available on that specific DVD video disc. Notes about discs - This unit is designed for use with DVD video, Video CD, Super video CD, Audio CD, CD-R, CD-RW (MP3 Supported), DVD+RW, DVD+R, DVD-R and DVD-RW. - CD-R and CD-RW cannot be played unless finalized. - Some discs cannot be played depending on the recording conditions such as PC environment and application software. The characteristics and condition of the discs; materials, scratches, curvature, and etc, may result in failure. - Be sure to use only CD-R and CD-RW discs made by reliable manufacturers. - Do not use any non standard shaped discs (heart, etc.) - Do not use disc with tape, scals, or paste on it, damage to the unit may result. - Do not use a disc printed on its surface by a commercially available label printer. Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. 2