Yamaha MD8 Owner's Manual - Page 100
display shows No Disc, Cannot eject a disc - troubleshooting
View all Yamaha MD8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
92 Troubleshooting Symptom MIDI sequencer does not synchronize to the MD8! MMC remote control does not work. A disc is loaded but the display shows No Disc! Cannot eject a disc! Advice Make sure that your MIDI sequencer supports MTC or MIDI Clock. Make sure that the MD4's MTC or CLK function is turned on. MTC appears on the display when MTC is used and MASTER appears when MIDI Clock is used. Make sure your MIDI sequencer is set to synchronize to an external MTC or MIDI Clock source. Refer to the MIDI sequencer's user manual. The MD8 can locate quickly, so some MIDI sequencers may not be able to synchronize immediately, especially when the MD8 is in A-B Repeat mode. Check whether you have assigned the correct Device ID number and whether the MD8 actually receives MMC messages (see page 81). Make sure that the disc is loaded correctly. Press [TOC WRITE] to write the TOC data to disc. Then eject the disc. MD8-Owner's Manual