Yamaha MD8 Owner's Manual - Page 14
FGROUP ASSIGN switches GPAN control HFader, groups. For mixdown it's used to pan i.e. - channel not working
View all Yamaha MD8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
6 Touring the MD8 F GROUP ASSIGN switches These switches are used to assign (i.e., send) the input channel signal to groups. They work in conjunction with the PAN control. For example, with GROUP ASSIGN switch [1-2] ON and the PAN control set midway, the channel signal is sent equally to Groups 1 and 2. With the PAN control turned fully counterclockwise (L/ODD), however, the channel signal is sent only to Group 1. Likewise, when it is set fully clockwise, the signal is sent only to Group 2. The same principle applies to GROUP ASSIGN switch [3-4]. Note that input channel signals are always sent to the Stereo bus regardless of the GROUP ASSIGN switch settings. G PAN control This rotary control has two functions: For recording it's used in conjunction with the GROUP ASSIGN switches to assign the input channel signal to even and odd numbered groups. For mixdown it's used to pan (i.e., position) the signal in the stereo mix. H Fader This fader has two functions: For recording it's used to adjust the level of the input channel signal that's recorded to a track. For mixdown it's used to balance the input channel signal relative to the other input channel signals. For optimum performance, faders should be positioned about the 7-8 mark. MD8-Owner's Manual