Yamaha MD8 Owner's Manual - Page 23
Front Connectors, MPHANTOM POWER ON/OFF switch APHONES BPUNCH I/O
View all Yamaha MD8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Front Connectors 15 M PHANTOM POWER ON/OFF switch This switch is used to turn on and off the phantom power for the XLR-type MIC/LINE (BAL) inputs on channels 1 and 2. Phantom power is used to power condenser microphones. It should be turned off when devices other than condenser microphones are connected to these inputs. Front Connectors 1 2 A PHONES A pair of stereo headphones can be connected here for monitoring. The headphone signal is the same as the MONITOR OUT signal. 1/4" TRS phone plug Tip (left) Ring (right) Sleeve (ground) B PUNCH I/O An optional footswitch, such as the Yamaha FC5, can be connected here for foot-controlled playback, rehearsal, recording, or punch in/out. MD8-Owner's Manual
Front Connectors
15
MD8—Owner’s Manual
M
PHANTOM POWER ON/OFF switch
This switch is used to turn on and off the phantom power for the XLR-type MIC/LINE (BAL)
inputs on channels 1 and 2. Phantom power is used to power condenser microphones. It
should be turned off when devices other than condenser microphones are connected to these
inputs.
Front Connectors
A
PHONES
A pair of stereo headphones can be con-
nected here for monitoring. The head-
phone signal is the same as the MONITOR
OUT signal.
B
PUNCH I/O
An optional footswitch, such as the Yamaha FC5, can be connected here for foot-controlled
playback, rehearsal, recording, or punch in/out.
1
2
1/4"
TRS phone plug
Tip (left)
Ring (right)
Sleeve (ground)