Yamaha MG20XU Owner's Manual - Page 32

Appendix General Specifications 0 dBu = 0.775 Vrms, Output impedance of signal generator (Rs) = 150 Ω All level controls are nominal if not specified. Input channels Output channels Bus Input Channel Function Mono: MIC/LINE Mono/Stereo: MIC/LINE Stereo: LINE STEREO OUT MONITOR OUT PHONES AUX SEND GROUP OUT STEREO GROUP AUX PAD HPF COMP EQ PEAK LED Level Meter Pre Monitor LEVEL Built-in Effect (XU Models only) SPX Algorithm USB Audio (XU Models only) 2 IN / 2 OUT Phantom Power Voltage Power Requirements Power Consumption Dimensions (W × H × D) Net Weight Included Accessory Optional Accessory Operating Temperature MG12XU MG12 MG16XU MG16 MG20XU MG20 4 8 12 2 2 4 2 2 0 2 1 1 2 4 4 2 4 4 1 1 1 2 4 4 2 (MG12XU: incl. FX) 4 (MG16XU: incl. FX) 4 (MG20XU: incl. FX) 26 dB 80 Hz, 12 dB/oct (Mono/Stereo: MIC only) 1 knob compressor (Gain/Threshold/Ratio) Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB Attack time: approx. 25 msec, Release time: approx. 300 msec HIGH: Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving MID: Gain: +15 dB/-15 dB Frequency: 2.5 kHz peaking MID: Gain: +15 dB/-15 dB Frequency: Mono 250 Hz - 5 kHz peaking Stereo 2.5 kHz peaking LOW: Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving LED turns on when post EQ signal reaches 3 dB below clipping (+17 dBu) 2 × 12 -segment LED meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB] 24 programs, PARAMETER control: 1, FOOT SW: 1 (FX RTN CH on/off) USB Audio Class 2.0 compliant, Sampling Frequency: Max 192 kHz, Bit Depth: 24-bit +48 V AC 100 - 240 V, 50 / 60 Hz 22 W 30 W 36 W 308 mm × 118 mm × 422 mm 444 mm × 130 mm × 500 mm 444 mm × 130 mm × 500 mm (9.6" × 2.8" × 11.6") (17.5" × 5.1" × 19.7") (17.5" × 5.1" × 19.7") MG12XU: 4.2 kg (9.3 lbs.) MG16XU: 6.8 kg (15.0 lbs.) MG20XU: 7.1 kg (15.7 lbs.) MG12: 4.0 kg (8.8 lbs.) MG16: 6.6 kg (14.6 lbs.) MG20: 6.9 kg (15.2 lbs.) Owner's Manual, Technical Specifications, Cubase AI Download Information (XU model only) Rack-mount kit (MG20XU, MG20, MG16XU, MG16 only) Rack-mount kit: RK-MG12 (for MG12XU, MG12), Foot Switch: FC-5 0 to + 40°C For other specifications, see the included "Technical Specifications." *1 Noise is measured with A-weighting filter. *2 Crosstalk is measured with 1 kHz band pass filter. Specifications and descriptions in this owner's manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please check with your Yamaha dealer. European Models Inrush Current based on EN 55103-1:2009 3.0 A (on initial switch-on) 2.0 A (after a supply interruption of 5s) Conforms to Environments: E1, E2, E3 and E4 32 MG20XU/MG20/MG16XU/MG16/MG12XU/MG12 Owner's Manual