Yamaha MM6 Owner's Manual - Page 68
Formatting a USB storage device, Press [EXECUTE] button and a confir
UPC - 086792858098
View all Yamaha MM6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Storing/Saving Data Formatting a USB storage device A new USB storage device must be formatted before it can be used by this instrument. CAUTION • If you format a USB storage device that already contains data, all of the data will be erased. Be careful not to erase important data when using the format function. 3 Press [EXECUTE] button and a confirmation message will appear. You can press the [DEC/NO] button at this point to cancel the operation. 1 After connecting the USB storage device to be formatted to the instrument's USB TO DEVICE terminal, check that "CONNECT" is showing in the MAIN display. 2 Press the [MENU] button. A message will appear asking you to confirm the format operation. NOTE • If the Load item appears in step 2, press the CATEGORY [INC] / [DEC] buttons as many times as necessary until the Format item appears. 4 Press the [EXECUTE] button again, or the [INC/YES] button, and the format operation will begin. CAUTION • Once the format-in-progress message appears on the display the format operation cannot be canceled. Never turn off the power or remove the USB storage device during this operation. 5 A message will appear on the display when the operation is complete. Press the [EXIT] button to return to the MAIN display. NOTE • If the USB storage device has been write-protected, an appropriate message will appear on the display and you will not be able to execute the operation. 68 MM6/MM8 Owner's Manual