Yamaha MM6 Owner's Manual - Page 69
Saving Data, Use the CATEGORY [DEC] and [INC]
UPC - 086792858098
View all Yamaha MM6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Storing/Saving Data Saving Data Three types of data are saved to one " User File" by this operation: user song, pattern file, and performance memory data. 1 Make sure that a appropriately formatted USB storage device has been properly connected to the instrument's USB TO DEVICE terminal, and that "CONNECT" is showing in the MAIN display. 2 Press the [MENU] button. 3 Use the CATEGORY [DEC] and [INC] but- tons to locate the User File Save item. A default file name will automatically be created. Cursor left Cursor right Delete character Select characters ● To Overwrite an Existing File If you want to overwrite a file that already exists on the USB storage device, use the dial or the [INC/YES] and [DEC/NO] buttons to select the file, then skip ahead to step 6. NOTE • If the USB storage device has been write-protected, an appropriate message will appear on the display and you will not be able to execute the operation. • If there is not enough capacity left on the USB storage device to save the data, an appropriate message will appear on the display and you will not be able to save the data. Erase unwanted files from the USB storage device to make more memory available (page 72), or use a different USB device. • Refer to the "Messages" list on page 83 for other possible errors that might prevent you from completing the operation. 4 Press the [EXECUTE] button. A cursor will appear below the first character in the file name. 5 Change the file name as necessary. • The [1] button moves the cursor to the left, and the [2] button moves it to the right. • Use the dial to select a character for the current cursor location. • The [8] button deletes the character at the cursor location. Cursor Settings for alphabetic and numeric characters: A BCDE FGH I J K LMNOPQRS T U VWX Y Z a b c d e f g h i j k l m n opq r s t uvwx y z01234567 8 9 6 Press the [EXECUTE] button. A confirmation message will appear on the display. You can press the [DEC/NO] button at this point to cancel the operation. 7 Press the [EXECUTE] button again, or the [INC/YES] button, and the save operation will begin. The user file will be stored to the USER FILES folder in the USB storage device. CAUTION • Once the save-in-progress message appears in the display, the operation cannot be canceled. Never turn off the power or remove the USB storage device during this operation. 8 A message will appear on the display when the operation is complete. Press the [EXIT] button to return to the MAIN display. NOTE • If an existing filename is specified you will be prompted for confirma- tion. Press [EXECUTE] or [INC/YES] if it is OK to overwrite the file, or [DEC/NO] to cancel. • The amount of time it will take to perform the save operation depends on the particular USB storage device you are using. MM6/MM8 Owner's Manual 69