Yamaha N3 N3/N2 Owners Manual - Page 28
Playing Back the Song Recorded to the Instrument, Start recording.
View all Yamaha N3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
ENGLISH Recording your Performance 3 Start recording. Recording starts as soon as you play the keyboard. Alternatively, press the [PLAY/STOP] button to start recording. ↓ The [RECORD] button indicator and the [PLAY/STOP] button indicator light up. 4 Stop recording. Press either the [RECORD] or [PLAY/STOP] button to stop recording. ↓ Data writing will begin. When the recording is finished, the "End" appears on the display for three seconds. End If the metronome was on when you started recording, you'll be able to keep time with the metronome while recording, but the metronome sound will not be recorded. If the memory becomes full during recording, "FUL" will appear on the display and recording will stop automatically. (All recorded data up to that point will be retained.) If you wish to erase previously recorded data to the instrument, press the [PLAY/ STOP] button to start recording, then press it again to stop recording. Do not connect any USB device during this operation. The song data recorded to a USB flash memory device can be erased by using a computer. CAUTION Do not turn off the power to the instrument or disconnect the USB flash memory device, while the instrument is recording the data (while "---" is displayed ). Otherwise, all recorded data, including the data being recorded, will be lost. 5 Play back the recorded performance. Press the [PLAY/STOP] button to start playback of the recorded performance. When you record to a USB flash memory device directly, if you select another song or disconnect the USB device after recording, the recorded performance cannot be played back by pressing the [PLAY/STOP] button. Refer to "Listening to songs in USB Flash Memory" on page 31 to play back the song. Playing Back the Song Recorded to the Instrument You can play back the song recorded to the instrument using the Record function (page 27). You can also play the keyboard along with the playback. Refer to page 31 to playback the song recorded to a USB flash memory device. 2, 3 1 1 1 Engage User Song mode. While holding down the [DEMO/SONG] button, press the [+] or [-] button until "Usr" appears on the display. 2 Start playback. Press the [PLAY/STOP] button to start playback. 3 Stop playback. Press the [PLAY/STOP] button again to stop playback. Usr User song: In this manual, the performance data recorded to this instrument is called a "User song". 28 • N3/N2 Owner's Manual 26