Yamaha N3 N3/N2 Owners Manual - Page 42

N3: Assembling the Unit 4 Set the piano upright. 7 Attach the pedal. Insert the pedal brace rods into the pedal box recesses and make sure they fit securely, then securely tighten the screws to attach the pedal. ENGLISH 5 Attach and securely tighten the left front leg with the bolts while holding the piano firmly. 8 Connect the pedal cord. 8-1 Make sure the pedal cord is clipped into the cord holder. 8-2 Insert the pedal cord plug into the pedal jack. x 6 CAUTION Do not hold the control panel. Using excessive force on the panel can result in damage to the instrument. 6 Attach the pedal brace rods. Find the threaded bores on the bottom of the unit, and securely tighten the screws to attach the rods. 9 Connect the power cord. 9-1 Insert the power cord plug into the [AC IN] connector. 9-2 Attach the cord holders to the instrument, then clip the power cord into the holder. (the bottom of the left side as seen from the front) ■ After completing the assembly, please check the following. • Are there any parts left over? → Review the assembly procedure and correct any errors. • Is the instrument clear of doors and other movable fixtures? → Move the instrument to an appropriate location. • Does the instrument make a rattling noise when you shake it? → Tighten all screws. • Is the power cord inserted securely into the sockets? → Check the connection. • If the main unit creaks or is otherwise unsteady when you play on the keyboard, refer to the assembly diagrams and retighten all screws. 42 • N3/N2 Owner's Manual 40