Yamaha N3 N3/N2 Owners Manual - Page 41
N3: Assembling the Unit
View all Yamaha N3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
39 ENGLISH N3: Assembling the Unit CAUTION • Be careful not to confuse parts, and be sure to install all parts in the correct orientation. Please assemble in accordance with the sequence given below. • Assembly should be carried out by at least three persons. • Be sure to use the correct screw size, as indicated below. Use of incorrect screws can damage the instrument. • Be sure to tighten all screws upon completing the assembly of each unit. • To disassemble, reverse the assembly sequence given below. Have a Phillips-head (+) screwdriver of the appropriate size ready. CAUTION Do not lay the main unit upside down on the floor. Incorrect 1 Remove the parts and collect them together for assembly. 1-1 Remove the parts shown below from the smaller box. Legs Bolts 2 Attach and securely tighten the right front leg and the rear leg with the bolts. x 6 x 17 Pedal x 5 Front (L) Rear Front (R) Screws x 4 Pedal brace rods x 2 AC power cord Cord holders x 3 Wrench (Used to tighten bolts) 1-2 Set the larger box upright with the right side up. 1-3 Cut the bands. 1-4 Remove the covers. CAUTION When the instrument is set upright (as in the illustration above), take extra care not to keep the instrument from falling over, since it is unstable in this position. 3 Set a blanket at the left corner. N3/N2 Owner's Manual • 41