Yamaha P-200 Owner's Manual - Page 52
LOCK MODE, Disable
View all Yamaha P-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
PERFORMANCE ENABLE The Performance Enable function lets you switch between System ("Sys") settings and Performance ("Perf") settings for MIDI channel assignments, local on/off status and controller assignments. This function lets you apply the System settings designated in Voice Play mode to all of the Performances. q PERFORMANCE MIDI CHANNEL (Perf, Sys) When Perf is selected, the MIDI transmit and receive channels designated for the currently selected Performance will be effective. When Sys (default) is selected, the MIDI transmit and receive channels designated for the Voice Play mode will affect the entire system. PERF.MIDI CH ) sys/ sys/ sys q PERFORMANCE LOCAL (Perf, Sys) When Perf is selected, the Local On/Off setting designated for the currently selected Performance will be effective. When Sys (default) is selected, the Local On/Off setting designated for the Voice Play mode will affect the entire system. PERF.LOCAL ) sys/ sys/ sys q PERFORMANCE CONTROL (Perf, Sys) When Perf is selected, the controller assignments designated for the currently selected Performance will be effective. When Sys (default) is selected, the controller assignments designated for the Voice Play mode will affect the entire system. PERF.CTRL. ) sys/ sys/ sys POPUP TIME The Popup Time function lets you set the number of seconds a temporary message displays in the screen. The P-200 has a number of messages which appear in the screen depending on which feature you access. By setting the Popup Time, you can determine how long the message stays in the screen. You can also set the Program Change message screen to temporarily display when you change voices or Performances. q PC (OFF, 1 ~ 5) You can either turn the Program Change popup screen off or have it display between one and five seconds. (The default setting is Off.) q OTHERS (1 ~ 5) You can have all other popup screens display between one and five seconds. (The default setting is 3.) POPUP TIME * PC=off OTHERS= 3 STORE TYPE The Store Type function lets you designate Auto Store or Non Auto Store status. (For information about storing, see page 60.) STORE TYPE + auto store q NON AUTO STORE In Non Auto Store (default) status, only System, MIDI Filter and PC Table parameters you change will automatically be stored. Any other changes in Edit mode will cause the STORE? (YES/NO) screen to display to prompt you for confirmation before exiting the Edit mode. Any other changes made in Voice Play mode and Performance Play mode will be ignored unless you specifically perform the store operation. q AUTO STORE In Auto Store status, all settings you change will automatically be stored. NOTE When Non Auto Store is selected and Edit mode is engaged, the letter S, P or V will appear to the right of the page number in the upper right hand corner to indicate which type of parameters you are editing-System, Performance or Voice parameters, respectively. NOTE Channel, Local, CS FC and PS settings are basically classified as Performance parameters, though they are treated as System parameters when Sys is selected for MIDI Channel, Local or Controller Assign in the Performance Enable function (System Menu); see left. When Sys has been selected, the letter S will appear to the right of the page number, replacing the letter P. PANEL SWITCH LOCK MODE This control determines whether the Panel Switch Lock function (page 41) can be used or not. When set to Enable, the Panel Switch Lock is available; the Disable setting disables the function. The setting made here is automatically stored. LOCK MODE Disable POPUP TIME * PC=off OTHERS= 3 q DISABLE When set to Disable (default), the Panel Switch Lock function cannot be used; in other words, double clicking a [VOICE SELECT] button will not lock the panel controls. 52