Yamaha P-200 Owner's Manual - Page 67
Error Messages
View all Yamaha P-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
s Error Messages Occasionally you may encounter certain error messages which appear in the LCD screen. Below is a list with descriptions of each. *** ERROR1 *** REPLACE BATTERY The internal backup battery charge is low and the battery should be replaced. (See page 6.) *** ERROR2 *** MIDI RX OVERFLOW Too much MIDI data is being received at once. Reception of data is interrupted and cannot be continued. Reduce the amount of data and attempt the operation again. *** ERROR3 *** MIDI DATA ERROR An error occurred during reception of MIDI data. Check all MIDI connections, settings, etc., and attempt the operation again. *** ERROR4 *** MIDI BULK ERROR An error occurred during reception of bulk data. Check all MIDI connections, settings, etc., and attempt the operation again. *** ERROR5 *** MIDI FILTER ON ! Certain data cannot be transmitted or received because a MIDI Filter is set to On. Check each MIDI Filter setting in Edit mode. (See page 53.) *** ERROR6 *** DEVICE NO. ERROR Bulk data cannot be transmitted or received because the Device Number parameter is either turned off or does not match that of the connected device. (See page 62.) *** ERROR7 *** MERGE SW ON ! The Send Bulk Data operation cannot be executed when MIDI Merge is on. (See page 51.) 67