Yamaha PSR-1500 Owner's Manual - Page 100
Editable Parameters in the SOUND CREATOR [ORGAN FLUTES], displays, FOOTAGE
View all Yamaha PSR-1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Using, Creating and Editing Voices Voice Creating-Sound Creator CAUTION If you select another Voice without saving the settings, the settings will be lost. If you wish to store the settings here, make sure to save the settings as a User Voice before selecting another Voice or turning the power off. 4 If you select the EFFECT/EQ tab display, use the [A]/[B] buttons to select the parameter to be edited. 5 Use the [A]-[D], [F]-[H] and [1π†]-[8π†] buttons to edit the Voice. 6 Press the [I] (SAVE) button to save your edited ORGAN FLUTES Voice (page 67). Editable Parameters in the SOUND CREATOR [ORGAN FLUTES] displays The following covers in detail the editable parameters that are set in the displays explained in step 3 of the "Basic Procedure." The Organ Flutes parameters are organized into three different pages. The parameters in each page are described separately, below. These are also treated as part of the Voice Set parameters (page 101), which are automatically called up when the Voice is selected. FOOTAGE, VOLUME/ATTACK (common parameters) ORGAN TYPE ROTARY SP SPEED VIBRATO ON/OFF Specifies the type of organ tone generation to be simulated: Sine or Vintage. Alternately switches between the slow and fast rotary speaker speeds when a rotary speaker effect is selected for the Organ Flutes (see "EFFECT/EQ" DSP TYPE parameter on page 98), and the Voice Effect DSP (page 98) is turned on (this parameter has the same effect as the Voice Effect VARIATION ON/OFF parameter). Alternately turns the vibrato effect for the Organ Flutes Voice ON or OFF. VIBRATO DEPTH Sets the Vibrato depth to one of three levels: 1 (low), 2 (mid), or 3 (high). Footage: The term "footage" is a reference to the sound generation of traditional pipe organs, in which the sound is produced by pipes of different lengths (in feet). FOOTAGE 16' ← → 5 1/3' 16'-1' Switches the controllable footage (by using the [D] button), between 16' and 5 1/3'. Determines the basic sound of the organ flutes. The longer the pipe, the lower the pitch of the sound. Hence, the 16' setting determines the lowest pitched component of the Voice, while the 1' setting determines the highest pitched component. The higher the value of the setting, the greater the volume of the corresponding footage. Mixing various volumes of the footages lets you create your own distinctive organ sounds. 100 PSR-3000/1500 Owner's Manual